Epson PhotoPC 650, User Manual, Page: 62 / 158

4-10 Getting Photos Into Your Computer
2
Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
3
Open the card and port cover on the side of the camera.
Then insert the other end of the cable into the camera’s
serial port.
4
Turn on your computer system.
NOTE
If you have problems connecting to your COM port, check your
computer’s COM port settings and try again. If you have a high-
speed serial board, you may be able to transfer pictures at
230.4Kb per second. See page 4-23 for instructions on changing
your Port speed setting with EPSON PhotoPC 650 TWAIN.
Connecting the Camera to a Macintosh
Make sure you have the long serial cable and short
Macintosh adapter that came with your camera. Before you
start, turn off the camera, LCD monitor, and Macintosh.
NOTE
On a PowerPC Macintosh, you may be able to transfer your
pictures at 230.4Kb per second. See page 4-23 for instructions on
selecting your Port setting with the EPSON PhotoPC 650 Plug-In.
1
Connect the small Macintosh adapter cable to either the
modem port or printer port on the back of your
Macintosh.