Epson PhotoPC 650, User Manual

Page: 75 / 158

Getting Photos Into Your Computer 4-23
A
B
3
To save your pictures in your application, click a picture
window and select your application’s Save command.
(Check your application’s help utility for detailed
instructions.)
What To Do If the Camera Doesn’t
Respond
If you don’t see your camera’s pictures in the EPSON
PhotoPC 650 TWAIN or Plug-In window and you see an
error message like this one, follow the steps in this section.
1
Click the Open Camera button on the Camera
Content tab. If you still don’t see your pictures and the
error message appears again, continue with step 2.
2
Click the Setup tab on the window and make sure the
Port option is set to either Auto Detect (Windows) or
Auto
(Macintosh). For best results, try setting the Speed
to 115200 (Windows) or 230400 (Macintosh).
3
Click the Camera Content tab, then click Open
Camera again. If you still don’t see your pictures and
the error message appears again, continue with step 4.
4
Check the cable and make sure the connections are
secure, and the pins inside the connector are not bent.
Speed
setting
Port setting