
28
Step-by-Step Scanning Instructions
This section contains step-by-step instructions for using the scanner drivers and
creative software in Windows 98 and iMac. For more details on using the scanner
software, see the
EPSON TWAIN User’s Guide
on your CD-ROM. For instructions
If your computer fails to recognize the scanner, you won’t see
the EPSON TWAIN driver when you try to select a scanner
source from your host application. In addition, an error
message may appear. If this happens, turn off your scanner
and then turn it back on. Then restart the computer.
Do not connect or disconnect the USB cable while you are
using EPSON TWAIN.
Placing Your Original Document
1. Raise the scanner cover and place
your document face down on the
document table glass. If you’re
scanning a transparency, the
optional transparency unit should
be installed and turned on.
2. Position the document so the
horizontal and vertical edges are
carefully aligned with the scales
on the top and right side of the
document table.
3. Close the document cover slowly. Be careful not to move the document.
The self-adjusting scanner cover allows you to place thick
documents on the document table glass without removing the
cover. But if your document is too thick to fit under the cover,
you can remove the cover as described on page 33.
corner of the
document
Summary of Contents for Perfection 636U
Page 1: ...Scanner Basics CPD 8119 ...