Epson Perfection 1200s, User Manual, Page: 28 / 113

21
7. After the scanner software installation is complete, the EPSON Screen
Calibration utility automatically starts. You must calibrate your screen and
scanner to reproduce images closely matching the originals.
You don’t need to change the screen calibration again so long
as you continue to use the same monitor. If you don’t see the
utility or if you need to recalibrate your screen at a later time,
click Scanners and Cameras in the Control Panel (click Start
> Settings > Control Panel > Scanners and Cameras from
the Windows Desktop to access it). On the Devices tab,
select Scanner . Click Properties , then click the Calibration
button.
In the following window, move the slider to the right or left until the shades of the
horizontal gray stripes appear similar. View the screen from a short distance. The
gray stripes will not perfectly blend together; however, try to make the two tones
match as closely as possible.
8. Click
OK
to register the calibration setting.
before calibration after calibration