manualshive.com logo in svg

Epson P07303, User Manual

Share
Download
Epson P07303 User Manual Download Page 13

 

9 

 

5.7. Software Status Setting   

When system POWER ON, there is no need to turn off to modify Command Type, Baud Rate, Parity,   
Demo Mode and International Character. To re-set DIP Switch to various Command Type under 
the following list of Command to modify the setting. The setup value will stored in the EEPROM.   
When DIP Switch is OFF. Next time the system POWER ON previous setup value will be the   
default value and no need to modify. 

 

5.7.1. Baud rate 

    STX 05 B n ETX   

/Set baud rate and keep it with EEPROM/ 

    ASCII Format     STX 05 B n ETX 
    Dec. Format      [02][05][66] n [03] 
    Hex. Format      [02h][05h][42h] n [03h]    30h n 34h 

        Description              Change the display communication baud rate. The baud rate setting can be   

selected from 4800 to 38400. 

N Baud 

rate 

30h 4800 
31h 9600 
32h 19200 
33h 38400 

                                                             

 

  5.7.2 International character set 

STX 05 S n ETX     

/Change international character set/ 

ASCII Format          STX 05 S N ETX 
Dec.  Format     [02][05][83] n [03] 
Hex.  Format     [02h][05h][53h] n [03h]   30h n 3fh 
 
 
Description       Change the display international character font .A total of 16 different character   

fonts to select from. The setting function will be saved to EEPROM. 

Summary of Contents for P07303





































Reviews:

No comments

Brands by name

Popular brands

Load more brands