Battery Replacement
Your P-80 uses a nickel cadmium battery. If the red light keeps flash-
ing after the battery has been charged, the battery has come to the end
of its life and must be replaced. Nickel cadmium batteries are available
through your Epson dealer.
To replace the battery, follow the steps below.
1.
See that the power switch is OFF,
2.
Remove the two screws on the
battery holder cover
at the back of
the printer by using a Phillips screwdriver (Figure
2-4).
Figure
2-4.
Removing the screws
3.
Carefully lift the battery holder cover by placing your index fingers
at the top of the cover as shown in Figure
2-5,
and your thumbs
underneath the ridge at the bottom of the cover.
19
