Doing More with Epson MovieMate
49
Saving Power
The power turns off automatically when a DVD is stopped for more
than 30 minutes. You can select a time to turn off the projector while a
movie is playing, in case you fall asleep while watching.
To select a sleep setting, press
. Continue pressing the button to
select from the following settings:
■
Sleep Off:
The power switches off automatically after 30 minutes
of inactivity (default setting).
■
Sleep 10, 20, 30, 60, 90, 120, 150:
The power switches off
automatically after the number of minutes specified, whether or
not a movie is playing. You can select from
10
to
150
minutes.
After you set the sleep timer, you can see the time remaining by pressing
.
Note:
Sleep timer settings are not saved after you turn the projector off.
Changing Language Settings
You can use the Language Setup Page to change the default language for DVDs that allow
you to make this selection.
1. Press the
button on the remote control. You see the Language Setup Page:
2. Press
to highlight the setting you want, then press
to display the list of languages
available.
OSD Language
is the language used for the projector’s menus. Other settings may not
be available, depending on the DVD you are playing.
3. Press
to select the language you want, then press
to save it. For a list of language
codes, see page 80.
4. To exit the menu, press
.
Summary of Contents for MOVIEMATE 62
Page 1: ...Epson MovieMate 62 User s Guide ...
Page 16: ...16 Welcome ...
Page 83: ......
Page 85: ... ...
