Epson ME100, Service Manual

Page: 25 / 135

EPSON Stylus CX1500/ME100 Revision A
PRODUCT DESCRIPTION Control Panel 25
1.5.3 Operations
1.5.3.1 Normal Operation
Note *1: Only valid in idle state and paper out error.
*2: Only valid in idle state.
*3: Not valid for Scanning, Printing, Head Cleaning, Ink Cartridge Exchange and Power
On/Off.
Table 1-22. Normal Operation
Button Condition Function
Power
Button
At Standby
V
Enter Power On State
V
Power LED blink until enter Idle state.
V
At Idle state, Power LED keeps On.
At other state
except
Standby
V
Enter Power Off State
V
Power LED blink until enter Standby state.
V
At Standby state, all LEDs keep Off.
Ink
maintenance
Button
• Idle state
• Ink Low
• Ink Out
V
Press less than 3 sec
1. If no Paper in Printer, load paper (Idle state, Ink Low)
2. If Paper in Printer, eject paper (Idle state, Ink Low)
T
Exchange Ink Cartridge (Ink Out)
V
Press between 3 to 6 sec
T
Head Cleaning (Idle state)
T
Exchange Ink Cartridge (Ink Low, Ink Out)
V
Press over 6 sec
T
Force to exchange Ink Cartridge
Paper Error Push to recover Paper Error
Number of
Copy
Button*
1
Power On
Setting
Number of Copy = 1
Number of
Copy
V
Add 1 and the number becomes 2 to 3.
V
Reset to “1”.
Error release Reset to “1”.
Media
Select
Button*
1
Power On
Setting
Plan paper
Media Type Alternate paper type of “Plain Paper” and “PGPP”.
Fit to page
Button*
2
Factory
Setting
OFF
Fit-to-Page Alternate Fit-to-Page of On and Off.
B&W copy
start Button
In Idle state
V
B&W copy start.
1. Paper size & type, Fit-to-Page settings are stored.
2. Based on the setting, do B&W copy.
3. When Copy finished, restore Number of copies, Paper
size & type, Fit-to-Page setting to Panel. Number of
Copy Reset to “1”.
4. If paper out error is happened in 2nd or 3rd copies, stop
the copy operation, cancel the paper out error
automatically and enter Idle state.
In Error state Continue processing
Color copy
start Button
In Idle state
V
Color copy start.
1. Paper size & type, Fit-to-Page settings are stored.
2. Based on the setting, do B&W copy.
3. When Copy finished, restore Number of copies, Paper
size & type, Fit-to-Page setting to Panel. Number of
Copy Reset to “1”.
4. If paper out error is happened in 2nd or 3rd copies, stop
the copy operation, cancel the paper out error
automatically and enter Idle state.
In Error state Continue processing
Stop
Button*
3
In Copying
state
1. Stop and cancel the job of copy.
2. If there is a paper, or there might have a paper, discharge
the paper.
3. Restore the Number of copies, Paper size & type, Fit-to-
Page setting to Panel. Number of Copy Reset to “1”.
In Error state
1. Cancel current
2. Number of Copy Reset to “1”.
Table 1-22. Normal Operation
Button Condition Function