Printer Specifications
Mechanical
Electronic
Electrical
Environmental
Paper
Recommended printable area
Paper alignment
Mechanical
Printing method:
9-pin impact dot matrix
Printing speed:
High speed draft
347 cps at 10 cpi
357 cps at 12 cpi
390 cps at 15 cpi
High speed draft condensed
383 cps at 17cpi
298 cps at 20 cpi
Draft
260 cps at 10 cpi
312 cps at 12 cpi
223 cps at 15 cpi
Draft condensed
222 cps at 17 cpi
260 cps at 20 cpi
Draft emphasized
130 cps at 10 cpi
NLQ
65 cps at 10 cpi
78 cps at 12 cpi
55 cps at 15 cpi
47 cps at 17 cpi
56 cps at 20 cpi
Printing direction:
Bidirectional logic seeking for text and graphics printing. Unidirectional
text or graphics printing can be selected using software commands.
Line spacing:
4.23 mm (1/6-inch) or programmable in 0.118 mm (1/216-inch)
increments
Printable columns:
80 columns (at 10 cpi)
Resolution:
240 × 144 dpi maximum
Feeding method:
Friction feed (rear paper entry)
Push tractor feed (rear paper entry)
Feeder:
Rear push tractor
Roll paper holder (Optional)
Paper feed speed:
Continuous
63 mm/second
(2.5 inches/second)
Intermittent
63 msec/line at 1/6-inch line spacing
Reliability:
Total print volume
20 million lines
(except print head)
MTBF 10,000 POH
(25% duty)
Print head life
400 million strokes per wire
Dimensions and weight:
When using continuous paper:
Height
199 mm (7.8 inches)
Width
362 mm (14.3 inches)
