NEW LQ-850/1050+ DOT-MATRIX PRINTER
Mechanical
Ribbon:
Black
ribbon cartridge #7753/#7754:
Life expectancy (in Letter Quality
characters, at 48 dots/character)
2
million characters
Film ribbon cartridge #7768/#7770:
Life expectancy (in Letter Quality
characters)
#7768: 0.2 million characters
#7770: 0.3 million characters
MCBF:
For all components excluding print head:
5,000,000 lines
MTBF:
LQ-850: 4000 power-on hours
(at 25% duty)
LQ-1050: 6000 power-on hours
(at 25% duty)
Print head life:
200 million strokes fabric ribbon
100 million strokes film ribbon
Dimensions and weight:
Electrical
Voltage:
120 VAC ± 10%
Power consumption:
(self test printing: draft mode)
LQ-850: 55W 240W (maximum)
LQ-1050: 60 W
Frequency:
49.5-60.5 Hz
Insulation resistance:
10M ohms between AC power line and
chassis
Dielectric strength
Can withstand 1.00 kV rms
(between
AC
line
applied for one minute or 1.20 kV rms
and chassis):
applied for one second
Environmental
Notes:
Temperature:
Operation:
Storage:
Humidity
(without
Operation:
condensation):
Storage:
41°F to 95°F (5°C to 35°C)
-22°F to 150°F (-30°C to 65°C)
10% to 80%
5% to 85%
l
The use of 24 lb paper is only available at normal temperature.
l
Printing past the edge of envelopes, multi-part forms labels,
or paper that is thicker than normal can damage the print
Operation angle:
Less than 15° (without cut sheet feeder)
0° (with cut sheet feeder)
Shock:
Vibration:
Operation:
Up to 1G within 1 ms
Storage:
Up to 2G within 1 ms
Operation:
Up to 0.25 G at up to
55 Hz
Storage:
Up to 0.50 G at up to 55 Hz
Paper Handling
Paper feeding methods:
Friction
Built-in push feed tractor with paper
tension unit
Pull tractor (optional)
Single-bin or double-bin cut sheet feeder
(optional)
Paper width and length:
Paper
LQ-850
LQ-1050
Single sheet
width
7.2 to 10.1 inches 7.2 to 14.3 inches
(182 to 257 mm)
(182 to 364 mm)
length
7.2 to 14.3 inches 7.2 to 14.3 inches
(182 to 364 mm)
(182 to 364 mm)
Continuous paper
width
4.0 to 10.0 inches 4.0 to 16.0 inches
(101 to 254 mm)
(101 to 406 mm)
Envelopes
No.6 6.54
x
3.62 inches (166 x 92 mm)
No.10 9.45
x
4.09 inches (240 x 104 mm)
Labels
2.5
x
0.94 inch (63.5 x 23.8 mm ) minimurn
Printable area:
Single sheet
0.33 inch (8.5 mm) minimum
t
-
Printable
=
:
area
.12 inches (3.0 mm)
minimum
0.53 inch (13.5 mm) minimum
Note;
For the LQ-850, printing on paper from 9 to 10.1 inches
wide increases the minimum right and left margins to 0.53 inches.
l
Labels with a pressure sensitive covering, either glued or
tacked onto the backing sheet, can be printed under the
conditions listed below. The total thickness may not exceed
0.0118 inch (0.3 mm).
-The temperature range is between 41°F and 95°F (5 to 35°C).
-The relative humidity is between 10 and 80 percent.
NEW LQ-850/1050+-2
12/31/90
24-Pin Printers
