REV.-A
10) Screws
CB
BOARD
MAIN
Figure 3-7. BOARD
Adjustment Required
When replacing the BOARD
you must adjust the bidirectional print position again
to ensure bidirectional printing is
aligned
<Bidirectional Print position
section
3.2.3,2
Removing the BOARD
SUPPLY
Board)
2.
3.
4.
Remove the HOUSING
(see Section 3.2.2.2).
Remove the cable from the connector
of the BOARD
Remove the cable for connector
of the BOARD
SUPPLY.
Remove five
X 10) screws and the
X 8)
that hold the BOARD
SUPPLY to the HOUSING ASSY.,LOWER. Remove the BOARD
POWER SUPPLY.
BOARO
POWER SUPPLY
X
10) Screws
Figure 3-B. Removing the BOARD
SUPPLY
3.2.3.3
Removing the BOARD ASSY.,PANEL(C082 PNL Board)
1. Remove the HOUSING, FRONT (see Section 3.2.2.1).
2. Remove five
X 10) screws that hold the BOARD
to the
HOUSING, FRONT. Remove the BOARD
Figure 3-9. Removing the BOARD
3-8
