Use EpsonNet Config from the administrator’s computer. You can set many printers, but they need to be connected
physically by the Ethernet cable before setting. If you can build an Ethernet for the setting, and you set network settings
for the printer, and then connect printer to regular network, you can keep security risk low.
Using the Installer:
If the installer is used, the printer's network and client computer are set automatically. The setting is available by
following the installer's instructions, even if you do not have deep knowledge of the network. This is recommended
when setting the printer and a few client computers by using the server/client connection (sharing the printer using the
Windows server).
Related Information
&
“Assigning an IP Address Using EpsonNet Config” on page 14
&
“Connecting to the Network Using the Installer” on page 18
Installing EpsonNet Config
Download EpsonNet Config from Epson support website, and then install it by following the on-screen instructions.
Running EpsonNet Config
Select
All Programs
>
EpsonNet
>
EpsonNet Config SE
>
EpsonNet Config
.
Note:
If the firewall alert appears, allow access for EpsonNet Config.
Network Guide
Preparation
13
