manualshive.com logo in svg

Epson LQ-2090, Reference Manual

Share
Download
Epson LQ-2090 Reference Manual Download Page 93

Printer Software

85

3

3

3

3

3

3

3

3

3

3

3

3

❏

For Windows XP, 2000, or Windows NT 4.0, see “Using an 
additional driver” on page 87.

Setting the clients

❏

For Windows Me, 98, or 95, see “With Windows Me, 98, or 
95” on page 95.

❏

For Windows XP or 2000, see “With Windows XP or 2000” on 
page 96.

❏

For Windows NT 4.0, see “With Windows NT 4.0” on page 
100.

Note:

❏

When sharing the printer, be sure to set EPSON Status Monitor 3 
so that the shared printer can be monitored on the printer server. 
See “Setting up EPSON Status Monitor 3” on page 82.

❏

When you are Windows shared printer user in a Windows Me, 98, 
or 95 environment, on the server, double-click the 

Network

 icon in 

Control panel and make sure that the “File and printer sharing for 
Microsoft Networks” component is installed. Then, on the server 
and clients, make sure that the “IPX/SPX-compatible Protocol” or 
the “TCP/IP Protocol” is installed.

❏

The printer server and clients should be set on the same network 
system, and they should be under the same network management 
beforehand.

❏

The on-screen displays on the following pages may differ depending 
on the version of Windows OS.

Setting up your printer as a shared printer

When the printer server’s OS is Windows Me, 98, or 95, follow 
these steps to set the printer server.

1. Click 

Start

, point to 

Settings

, and click 

Control Panel

.

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands