manualshive.com logo in svg

Epson LQ-2090, Reference Manual, Page: 108 / 248

Share
Download
Epson LQ-2090 Reference Manual Download Page 108

100

Printer Software

❏

If the printer driver is installed in the client beforehand, you 
need to select either the new printer driver or the current printer 
driver. When the prompt to select the printer driver appears, 
select the printer driver according to the message. If the local 
printer driver for Windows XP or 2000 is installed beforehand, 
you can select the printer driver for Windows XP or 2000 as 
the current printer driver instead of the alternative driver in the 
Windows NT 4.0 server.

❏

If the additional driver for Windows XP or 2000 (Windows NT 
4.0) is installed in the Windows XP, 2000, or Windows NT 4.0 
printer server, go to the next step.

❏

If the additional driver is not installed in the Windows NT 4.0 
printer server or the printer server’s OS is Windows Me, 98, or 
95, go to “Installing the printer driver from the CD-ROM” on 
page 102.

6. For Windows 2000, select whether to use the printer as the 

default printer or not, then click 

OK

.

7. Make sure of the settings, then click 

Finish

.

.

With Windows NT 4.0

Follow these steps to set Windows NT 4.0 clients.

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments