Epson LQ-2090, Reference Manual

Page: 67 / 248

Paper Handling 59
2
2
2
2
2
2
2
2
2
2
2
2
❏
Use postcards under the following temperature and humidity
conditions:
Temperature: 15 to 25°C (59 to 77°F)
Humidity:
30 to 60% RH
❏
When loading A6 size cards, always load them long edge first.
Switching Between Printing on Continuous
Paper and Single Sheets
You can easily switch back and forth between printing on
continuous paper with a push tractor and printing on single
sheets without having to remove or reload the continuous paper.
Switching to printing on single sheets
Follow the steps below to switch from printing on continuous
paper from a push tractor to printing on single sheets.
Note:
❏
If continuous labels are loaded in the printer, remove them before
switching to single-sheet printing. See “Removing continuous
paper with labels” on page 55 for more information.
❏
If the tractor is in the pull position, remove any continuous paper
from it before switching to single-sheet printing. See “Removing
paper from the pull tractor” on page 39 for more information.
1. If any printed pages remain in the printer, press the Tear
Off/Bin button to advance the paper to the tear-off position.
Then tear off the printed pages.