Epson LQ-2090 Page 63 Reference Manual Download

Page: 63 / 248

Paper Handling

Caution:

❏

It is best to load continuous paper with labels on the pull
tractor. Loading labels on the rear or the front push tractor
is not recommended.

❏

Never feed labels backward using the

Load/Eject

Tear

Off/Bin

button. When fed backward, labels can easily peel off

the backing sheet and cause a paper jam.

❏

Because labels are sensitive to temperature and humidity, use
them only under normal operating conditions described
below:

Temperature: 15 to 25°C (59 to 77°F)
Humidity:

30 to 60% RH

❏

Do not leave labels loaded in the printer between jobs; they
may curl around the platen and jam when you resume
printing.

❏

Do not load continuous paper with labels from the rear paper
slot. Because the paper path from the rear slot is curved, labels
may come off their backing sheets inside the printer and cause
a paper jam.

❏

Do not load paper that is curled or has been folded.

Removing continuous paper with labels

To avoid peeling labels off the backing sheet and jamming the
printer, follow these steps to remove continuous paper with labels
from the printer:

Summary of Contents for LQ-2090

























































































































































































































































Search results

Summary of Contents for LQ-2090

Reviews:

Related manuals for LQ-2090

Brands by name

Popular brands

Epson LQ-2090, Reference Manual

Search results

Summary of Contents for LQ-2090

Reviews:

Related manuals for LQ-2090

Brands by name

Popular brands