PSB No: P-0082
Page: 2 of 14
ESC X m n1 n2 (Select Pitch and Point Size)
C X m n1
is the command for selecting pitch and point size
m, and
are variables. The
is used
the pitch, which is the character
spacing.
variable
selects the point size and the variable
at this time,
0 (zero).
variables
and
explained below.
for
the character pitch will be proportional spacing. To determine the
character pitch for all other values of
divide
by
For example, if
then 360
by 60 equals 6 and the character pitch is 6 characters per inch. If
the character pitch is 12 characters per inch.
diidedby2 For
example, if
the point size is 10.
the
size is 24. NOTE:
When
a
size
than 24
value for nl is
than
select
for the
In the Basic programming language, the command would look like this.
is
point proportional
is ESC,
proportional spacing,
selects 24 point
character size. At this time,
is
zero (0).
