Epson LABELWORKS PX User Manual Download

Page: 11 / 60

Frame and Table Lists

Start Here

2. Installing a tape cartridge

CAUTION

• Make sure that the power is turned off.

• You cannot use tape other than PX-tape.

• Make sure the top cover is closed firmly.

• If you opened the top cover while a tape cartridge is

installed, check that the tape end is put into the tape

eject slot before beginning operation.

• Take care to keep the label for detecting the tape

cartridge and the sensor of LW-PX900 clean.

Otherwise, tape may no longer be detected correctly.

• Do not touch the sensor directly with your fingers.

Label for detection

Sensor

1. Rewind the ink ribbon.

Use a pen
or a pencil.

2. Open the top cover.

Top cover

3. Install a tape cartridge.

Put the tape end
into the tape eject
slot.

4. Close the top cover.

Summary of Contents for LABELWORKS PX





























































Search results

Summary of Contents for LABELWORKS PX

Reviews:

Related manuals for LABELWORKS PX

Brands by name

Popular brands

Epson LABELWORKS PX, User Manual

Search results

Summary of Contents for LABELWORKS PX

Reviews:

Related manuals for LABELWORKS PX

Brands by name

Popular brands