80
Clean and Transport Your Product
If your printer gets dirty or you need to move it some distance, follow the instructions in these
sections:
Cleaning
To keep the printer working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzene, alcohol, or paint thinner to clean the printer or you may damage
it. Do not use oil or other lubricants inside the printer or let water get inside it.
Note:
After using the printer, close the paper support and the front cover to protect the printer from dust.
1. Turn off the printer.
2. Unplug the power cable.
3. Disconnect the USB cable.
4. Remove all the paper.
5. Clean the sheet feeder using a soft brush.
6. Clean the outer case with a soft cloth dampened with mild detergent.
Transportation
If you need to ship your printer or transport it a long distance, prepare it for transportation as
follows:
Caution:
When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside
down; otherwise ink may leak.
When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do not
subject it to impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink
bottle is tightened securely. Be sure to keep the ink bottle upright when tightening the cap, and
take measures to prevent ink from leaking when you transport the bottle.
1. Open the printer cover and check that the print head is all the way to the right (the home
position). If not, turn on the printer.
2. Turn off the printer.
3. Unplug all the connected cables.
4. Remove all the paper.
