10
TM-J9000/J9100
English
When the
INK OUT
LED flashes, it is almost time to change the ink
cartridge. Change the cartridge as soon as it is convenient. When the
INK
OUT
LED comes on, printing stops and you must change the cartridge.
The TM-J9100 has two separate cartridges, one each for black and colored ink
(red, green, or blue). Therefore, the TM-J9100 has two
INK OUT
LEDs, one for
BLACK and one for COLOR.
The TM-J9000 has only one INK OUT LED (for BLACK).
Follow these steps to install an ink cartridge for the first time or to replace
an empty ink cartridge.
1.
Make sure the printer power is on. If it is not on, plug in the power
supply cable and press the power switch on the front bottom-right of
the printer.
2.
Make sure the
INK OUT
LED is lit or flashing. When using both the
black ink and colored ink, check which of the ink cartridge
INK OUT
LEDs is lit or flashing.
3.
Hold the tab and open the ink cartridge cover.
4.
Hold the knob at the top of the empty ink cartridge and lift the
cartridge out of the printer.
(TM-J9100)
Summary of Contents for J9100 - TM Two-color Inkjet Printer
Page 1: ...TM J9000 J9100 User s Manual 405074700 ...
Page 27: ......
Page 28: ...Printed on Recycled Paper Printed in China 2004 08 ...
