72
5.
Set the
Crestron RoomView
setting to
On
to allow the projector to be detected.
Note:
Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson
Projector Management software.
6.
When you finish selecting settings, select
Complete
and follow the on-screen instructions to save
your settings and exit the menus.
7.
Turn off the projector, then turn it on again to enable the setting.
Parent topic:
Related references
Projector Setup Settings - ECO Menu
Controlling a Networked Projector Using Crestron RoomView
Once you have set up your projector to use Crestron RoomView, you can control and monitor projection
using a compatible web browser.
1.
Start your web browser on a computer connected to the network.
2.
Type the projector's IP address into the browser's address box and press the computer's
Enter
key.
You see this screen:
3.
Select the input source that you want to control in the Sources List box. You can scroll through
available sources using the up and down arrows in the box.