156
Reset the lamp timer to zero to keep track of the new lamp's usage.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related tasks
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note:
Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Reset
menu and press
Enter
.
4.
Select
Reset Lamp Hours
and press
Enter
.
You see a prompt asking if you want to reset the lamp hours.
5.
Select
Yes
and press
Enter
.
Summary of Contents for Home Cinema 1060
