Epson H6000P User Manual Download Page 4

2

   TM-H6000 User’s Manual

English

Safety Precautions

This section presents important information intended to ensure safe and 

effective use of this product. Please read this section carefully and store 

it in an accessible location.

WARNING:

Shut down your equipment immediately if it produces smoke, a strange 

odor, or unusual noise. Continued use may lead to fire or electric shock.

Immediately unplug the equipment and contact your dealer or a SEIKO 

EPSON service center for advice.
Never attempt to repair this product yourself. Improper repair work can 

be dangerous.
Never disassemble or modify this product. Tampering with this product 

may result in injury, fire, or electric shock.
Be sure to use the specified power source. Connection to an improper 

power source may cause fire or shock.
Never insert or disconnect the power plug with wet hands. Doing so 

may result in severe shock.
Do not allow foreign matter to fall into the equipment. Penetration of 

foreign objects may lead to fire or shock.
If water or other liquid spills into this equipment, unplug the power cord 

immediately, and then contact your dealer or a SEIKO EPSON service 

center for advice. Continued usage may lead to fire or shock.
Do not place multiple loads on the power outlet (wall outlet). 

Overloading the outlet may lead to fire.
Always supply power directly from a standard domestic power outlet.
Handle the power cord with care. Improper handling may lead to fire or 

shock.

Do not modify or attempt to repair the cord.
Do not place any object on top of the cord.
Avoid excessive bending, twisting, and pulling.
Do not place cord near heating equipment.
Check that the plug is clean before plugging it in.
Be sure to push the prongs all the way in. 

If the cord becomes damaged, obtain a replacement from your dealer 

or a SEIKO EPSON service center.

Summary of Contents for H6000P
















Reviews: