Epson GT-9000, Service Manual

Page: 23 / 41

EPSON GT-9600 Revision A
Disassembly and Assembly Disassembly and Assembly 17
8. Remove one screw(CBB, 3x12) securing the motor, and remove the
motor.
9. Loosen a screw(CBS, M3x6) securing the “Tension Lever
Assembly” to “Motor Frame”, move “Lever Assembly, Tension” to
the arrowed direction, releasing the tension of the timing belt of CR
motor. Then, remove “Timing Belt B”.
10. Remove 3 “Shaft, Damper, CR” and remove “CR Motor” from “Motor
Frame”.
Figure 3-7. CR Motor Assembly Removal
3.1.5 Lamp Assembly Removal
1. Remove carriage assembly. (Refer to Service Manual of GT-9500)
2. Remove 2 screws(CB, M3x6) securing “Cover, Rear, Carriage” to
“Carriage Assembly”, and remove “Cover, Rear, Carriage”.
3. Remove 3 screws (CB, M 3x6) securing “Cover, Carriage” to
“Carriage Assembly”, and remove “Cover, Carriage”.
Figure 3-8. Carriage Cover Removal
CBS(M3x6)
CBB(3x12)
CR Motor Assembly
CB(M3x6)
One screw(CB, M3x8) under “Cover,
Rear, Carriage”.