44
Installing Scanner Software
6. Follow the instructions on the screen to
install EPSON TWAIN Pro. When
installation is complete, you see the
window on the right. Make sure
SCSI
is
selected and
GT-10000
appears in the
Scanner Selection list.
7. Click
Test
to check the connection.
If the scanner software is installed
correctly, you see
Status: Device Ready
under Scanner Information. Click
OK
to
close the window.
(You can test your scanner connection at
any time. Double-click the
EPSON
TWAIN Pro
icon in the Windows
Control Panel to open the EPSON
TWAIN Pro window. Then click the
Test
button.)
8. Follow the instructions on the screen to install TextBridge Pro, Presto!
PageManager, and Acrobat Reader. Then follow the instructions on the screen to
register your scanner.
If you’re done installing software, restart your computer. If you want to install
PhotoDeluxe, go to the next section.
Summary of Contents for G650B
Page 1: ...Color Scanner User s Guide ...
Page 8: ...viii Contents ...
Page 85: ...Scanning With the ISIS Driver 77 ...