30
Installing Scanner Software
Installing the Software for Windows 98
Follow the instructions in this section to install your EPSON GT-10000+ scanner
driver and other software on your scanner software CD-ROM.
If you want to use your scanner on a network, follow the steps in the section
below to install the scanner driver on the scanner server, then go to Chapter 6,
“Network Scanning,” to install other scanner software and the software for client
systems.
Installing the Scanner Driver
You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer (as described in Chapter 1).
2. Turn on the scanner first, then
turn on your computer. When you see
the window on the right, click
Next
.
(The Wizard may also say it has found
an unknown device.)
Summary of Contents for G650B
Page 1: ...Color Scanner User s Guide ...
Page 8: ...viii Contents ...
Page 85: ...Scanning With the ISIS Driver 77 ...