10
Setting Up Your Scanner
Unlocking the Scanner
Before connecting the scanner
to a power source, you must
release the transportation lock,
located on the left side of the
scanner.
Use a coin or large flat-head
screwdriver to turn the
transportation lock to the
unlocked position, as shown.
Always lock the transportation lock before moving the scanner. Whenever
you lock the scanner, the scanner lamp must be in the home position (on
the left side of the scanner). See “Transporting the Scanner” on page 94
for more information.
Using SCSI to Connect Your Scanner
Read the sections below to install the included SCSI card, configure and connect the
scanner to the SCSI card, and install the SCSI software. If you are connecting with
SCSI and already have a SCSI interface installed in your computer, skip to “Setting
the SCSI ID Number” on page 12.
If you are using IEEE 1394 to connect, see page 22.
unlocked position
Summary of Contents for G650B
Page 1: ...Color Scanner User s Guide ...
Page 8: ...viii Contents ...
Page 85: ...Scanning With the ISIS Driver 77 ...