Epson FX-980 - Impact Printer, Service Manual

Page: 61 / 72

FX-980 Revision A
Appendix EEPROM Address Map 61
Table 7-3. EEPROM Address Map (3/7) Table 7-4. EEPROM Address Map (4/7)
Address Data Data Format
Q-pit
data
Factory
setting
1AH,
1BH Bottom margin for
front tractor 1 to 22 x 432 (by 1/432 inch),
0000H: 11inch (default) 0000H
(11 inch)
0000H
(11 inch)
1CH Font selection
0: Draft
1: Roman
2: Sans serif
00H
(Draft)
00H
(
Draft
)
1DH Pitch selection
0: 10 cpi
1: 12 cpi
2: 15 cpi
3: 17 cpi
4: 20 cpi
5: Proportional
00H
(10 cpi)
00H
(10 cpi)
1EH Copy mode
b0: copy mode
0: Off, 1: On
b1: pull tractor check
0: Yes, 1: No
b2 to b7: (reserved)
00H 00H
1FH
Print direction
setting
0: Bi-d.
1: Uni-d.
00H
(Bi-d.)
00H
(Bi-d.)
20H I/F mode selection
0: Auto I/F selection
1: Serial I/F
2: Parallel I/F
3: Type-B I/F
00H
(Auto)
00H
(Auto)
21H Auto I/F wait time
setting 10:10 sec.
30:30 sec.
00:10 sec. (default)
0AH
(10 sec.)
0AH
(10 sec.)
22H Auto line feed
Auto tear off
Skip over
perforation
High speed draft
Input buffer
---
---
---
b0: Auto line feed
0: Off, 1: On
b1: Auto tear off
0: Off, 1: On
b2: Skip over perforation
0: Off, 1: On
b3: High speed draft
0: On, 1: Off
b4: Input buffer
0: On, 1: Off
b5 to b7: (reserved)
00H 00H
Address Data Data Format
Q-pit
data
Factory
setting
23H Software
0 slash
Buzzer
---
Auto CR
---
---
---
b0: Software
0: ESC/P,
1: IBM 2380 Plus
b1: 0 slash,
0: Off, 1: On
b2: Buzzer
0: On, 1: Off
b3: (reserved)
b4: Auto CR (IBM)
0: Off, 1: On
b5 to b7: (reserved)
00H 00H
24H,
25H
Tear-off
adjustment value -128 to +127 (by 1/432 inch) 0000H 0000H
26H (reserved) 00H 00H
27H Backup flags 1
Copy mode
00H 00H
28H Backup flags 2
In tear-off state
Bin select
0: Friction Bin 1 or Tractor not
Tear off
1: Friction Bin 1
2: Friction Bin 2
3: (reserved)
4: Tractor & Tear off
00H 00H
29H Panel mask
pattern 1
b0: LOAD function
b1: EJECT function
b2: FONT selection
b3: PITCH selection
b4: TEAR OFF function
b5: BIN selection
b6: Draft self test
b7: NLQ self test
00H 00H