Epson FX-2170 - Impact Printer User Manual Download Page 49

Page: 49 / 157

Using Continuous

Paper

The printer’s paper-handling system allows you to load

continuous paper through the front, rear, or bottom.

You can print on continuous paper from 101 to 406 mm (4 to 16

inches) wide.

To print on continuous paper, you need to install the tractor unit

in the front or pull position. Be sure you set the paper release lever

correctly.

Note:

The rear push tractor cannot be removed.

Selecting the tractor position and paper path

The table below lists the different ways to feed continuous paper.

Always set the paper release lever to the position indicated for the

paper feed method you are using.

Tractor

Paper release

position

lever position

Paper paths

Front push

tractor and

front push/pull

Rear push

tractor and

rear push/pull

Pull tractor

2-8 Paper Handling

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands