![Epson ET-M3140 Series User Manual Download Page 44](http://html.mh-extra.com/html/epson/et-m3140-series/et-m3140-series_user-manual_109178044.webp)
Note:
When sharing a single phone line, make sure you connect the phone device to the EXT. port of the printer. If you split
the line to connect the phone device and the printer separately, the phone and the printer do not work correctly.
3.
Select
Fax
on the home screen.
4.
Pick up the handset.
The connection is established when
x
(
Send
) is enabled as the following screen.
Related Information
&
“Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)” on page 44
&
“Making Settings to Use an Answering Machine” on page 48
&
“Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)” on page 48
&
“Setting Receive Mode” on page 46
Making the Printer Ready to Send and Receive Faxes
(Using Fax Setting Wizard)
Fax Setting Wizard
configures the basic fax features to make the printer ready to send and receive faxes.
The Wizard is displayed automatically when the printer is turned on for the first time. You can also display the
wizard manually from the printer's control panel. You need to run the wizard again in case the wizard is skipped
when the printer is first turned on or when the connection environment has changed.
❏
The items below are what you can set through the wizard.
❏
Header
(
Your Phone Number
and
Fax Header
)
❏
Receive Mode
(
Auto
or
Manual
)
❏
The items below are set automatically according to the connection environment.
❏
Dial Mode
(such as
Tone
or
Pulse
)
❏
Line Type
(
PSTN
or
PBX
)
❏
Dial Tone Detection
❏
Distinctive Ring Detection (DRD) Setting
❏
Other items in
Basic Settings
remain as they are.
User's Guide
Fax Settings
44