Code
Situation
Solutions
I-41
Paper Setup Auto Display
is
disabled. Some functions cannot be
used.
If
Paper Setup Auto Display
is disabled, you cannot use AirPrint.
I-60
Your computer may not support
WSD (Web Services for Devices).
The scan to computer (WSD) feature is only available for computers
running English versions of Windows 10, Windows 8.1, Windows 8,
Windows 7 or Windows Vista. Make sure that the printer is correctly
connected to the computer.
Recovery
Mode
Update
Firmware
The printer has started in recovery
mode because the firmware update
failed.
Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable.
2. Visit your local Epson website for further instructions.
Related Information
&
“Contacting Epson Support” on page 229
&
“Installing the Applications Separately” on page 107
&
“Updating the Printer's Firmware using the Control Panel” on page 112
Paper Gets Jammed
Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error.
c
Important:
❏
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
❏
When removing jammed paper, avoid tilting the printer, placing it vertically, or turning it upside down;
otherwise ink may leak.
Removing Jammed Paper
1.
Remove the rear cover.
>
>
150
Summary of Contents for ET-M2120 Series
