Scanning Using WSD
Note:
❏
This feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista.
❏
If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
“Setting Up a WSD Port” on page 102
1.
Place the originals.
“Placing Originals” on page 35
2.
Select
Scan
>
WSD
on the control panel.
3.
Select a computer.
4.
Tap
x
.
Setting Up a WSD Port
This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏
The printer and the computer are connected to the network.
❏
The printer driver is installed on the computer.
1.
Turn the printer on.
2.
Click start, and then click
Network
on the computer.
3.
Right-click the printer, and then click
Install
.
Click
Continue
when the
User Account Control
screen is displayed.
>
>
102
Summary of Contents for ET-5800 Series
Page 17: ...Part Names and Functions Front 18 Inside 20 Rear 21 ...
Page 29: ...Loading Paper Paper Handling Precautions 30 Paper Size and Type Settings 30 Loading Paper 31 ...
Page 34: ...Placing Originals Placing Originals 35 Originals that are not Supported by the ADF 36 ...
Page 456: ...Where to Get Help Technical Support Web Site 457 Contacting Epson Support 457 ...