Epson ET-2830 Series, User Manual, Page: 117 / 169

Copy Quality is Poor
Color Missing, Banding, or Unexpected Colors Appear in Copies
The print head nozzles may be clogged.
Solutions
❏
Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then
clean the print head if any of the print head nozzles are clogged. If you have not used the printer for a
long time, the print head nozzles may be clogged and ink drops may not be discharged.
❏
If you printed when the ink levels were too low to be seen in the ink tank windows, refill the ink tanks
to the upper lines and then use the
Power Cleaning utility to replace the ink inside the ink tubes. After
you use the utility, perform a nozzle check to see if print quality has improved.
&
“Checking and Cleaning the Print Head” on page 65
&
“Running Power Cleaning” on page 67
Colored Banding Appears at Intervals of Approximately 3.3 cm
The following causes can be considered.
The paper type setting does not match the paper loaded.
Solutions
Select the appropriate paper type setting for the type of paper loaded in the printer.
The print head position is out of alignment.
Solutions
Align the print head.
❏
Windows
Click Print Head Alignment on the printer driver's Maintenance tab.
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
117