Epson ES-800C User Manual Download Page 47

Page: 47 / 89

The image does not look the same as the original.

Try different settings and combinations of the scanner

functions.

Check that your software is correctly installed. Check the

capability of your software and computer. (See your software

and computer manuals.)

If you are importing an image file into your application

software, see if the file format is acceptable for your software.

Also check that the settings of your application and your image

match. (See your software manual.)

line of dots is always missing on the scanned image.

If this happens on your printed image only, your printer or its

print head is probably malfunctioning. (See your printer

manual.)

If this happens on both your screen and printout, the scanner’s

sensor may be malfunctioning. Consult your dealer.

When halftoning is used, textured patterns composed of a series of

dots appear on particular areas of an image.

This is normal. See the Appendix for examples of halftoning.

4-8

Troubleshooting and Maintenance

Summary of Contents for ES-800C


























































































Search results

Summary of Contents for ES-800C

Reviews:

Related manuals for ES-800C

Brands by name

Popular brands

Epson ES-800C, User Manual

Search results

Summary of Contents for ES-800C

Reviews:

Related manuals for ES-800C

Brands by name

Popular brands