Epson ES-600C User Manual Download

Page: 80 / 90

Glossary

additive primary colors

Primary colors which produce white when mixed in a certain

proportion. These are red, green, and blue-the colors of the

scanner lamps.

bi-level data

Image data which is composed of 1 bit/pixel. A pixel is

represented by a single bit of digital data that can express only

1 (light) or 0 (dark).

bit

Short for binary digit. The smallest unit of data in computer

processing. A bit can represent two values, on and off, or 1

and 0.

bit/pixel

The unit to indicate the number of bits allocated for a pixel. The

larger the value, the more detail of a pixel is represented.

brightness

A scanner function to lighten or darken the output image data.

A unit of information consisting of eight bits. A byte can

represent a control code or character.

carriage

A component of the scanner which contains the optical sensor

and light source for scanning.

Glossary GL-1

Summary of Contents for ES-600C



























































































Search results

Summary of Contents for ES-600C

Reviews:

Related manuals for ES-600C

Brands by name

Popular brands

Epson ES-600C, User Manual

Search results

Summary of Contents for ES-600C

Reviews:

Related manuals for ES-600C

Brands by name

Popular brands