background image

Status and Error Messages (3/5)

EPSON EPL-N2500 Quick Reference

Turn the 

Image Optimum

 setting off on the 

control panel’s Printing Menu if you do not 
want the printer to automatically lower the 
print quality to continue printing.

You may need to increase the amount of 
printer memory to be able to print at the 
desired print quality for your document. For 
more information on adding memory, see 
the 

Reference Guide

.

Install Imaging Cart

The imaging cartridge is not installed or not 
installed correctly. Make sure that the 
imaging cartridge is installed correctly.

Invalid AUX I/F Card

This message means that the printer cannot 
communicate with the installed optional 
interface card. Turn off the printer, remove 
the card, then reinstall it.

Invalid PS3

An optional PostScript 3 ROM module that 
cannot be used on this printer is installed. 
Turn off the printer and remove the module.

Invalid ROM A

The printer cannot read the installed 
optional ROM module. Turn off the printer 
and remove the ROM module.

Jam XXX

The location where the paper jam occurred 
is displayed at 

xxx

xxx

 indicates the location 

of the error.

If a paper jam occurs at two or more locations 
simultaneously, the corresponding multiple 
locations are displayed.

Manual Feed xxx

The manual feed mode is specified for the 
current print job. Make sure the paper size 
indicated by xxx is loaded, then press the 

Start/Stop

 

button

If you do not want to print this job in manual 
mode, press the   Cancel Job 

button

.

For details on the manual feed mode, see the 

Reference Guide

Mem Overflow

The printer has insufficient memory to 
execute the current task. Press the 

Start/Stop

 

button

 on the control panel to 

resume printing. Or press the   Cancel Job 
button to cancel the print job.

Jam A

Paper is jammed at the Cover A. For 
instructions on how to remove 
jammed paper at the Cover A, see 
“Jam A (Cover A).”

Jam A B

Paper is jammed inside the output 
path cover (cover A or B) or fuser unit. 
For instructions on how to remove 
jammed paper at the output path 
cover or fuser unit, see “Jam A B 
(Cover A or B).”

Jam MP A

Jam C1 A

Jam C2 A

Jam C3 A

Paper is jammed inside the optional 
lower cassette. For instructions on how 
to remove jammed paper in the 
optional lower cassette, see “Jam MP 
A, Jam C1 A, Jam C2 A, Jam C3 A (All 
paper cassettes and Cover A).”

Jam DM

Paper is jammed inside the optional 
Duplex Unit’s paper path or cover 
(cover DM). For instructions on how to 
remove jammed paper at the Duplex 
Unit, see “Jam DM (Cover DM).”

Summary of Contents for EPL-N2500
















Reviews: