Epson EPL-N1600 Option, Service Manual

Page: 93 / 210

EPSON EPL-N1600 Chapter 3 Troubleshooting
Rev. A 95
3.12 SKEWED PRINTING
Problem Suspect Components
The image is not parallel with the
paper. The following components are assosiated with
this specific problem. One or more of these
components may have failed partially or
completely. If you can not isolate the problem
using this procedure, replace each components
listed below, one at a time, until the problem
disappears.
• Imaging Cartridge
• Paper Cassette
• Paper Path Rolls
Step Action and Question Yes No
1 PAPER FEED
• Are the paper cassettes installed
correctly?
• Is the paper loaded into the
cassette correctly?
Go to Step 2. Reload the
paper and re-
install the paper
cassette.
2 PAPER PATH
Inspect the entire paper path for any
ostructoion or contamination.
Is the paper path free of obstruction
or contamination?
Go to Step 3. Clean or
remove the
obstruction in
the paper path.
3 PAPER PATH ROLLS
Inspect all rolls along the paper path
for any contamination, wear or
damage.
Are the paper path rolls free of
contamination, wear or damage?
Go to Step 4. Replace the
damaged or
worn rolls to
new one.
4 IMAGING CARTRIDGE
Install a new Imaging Cartridge.
Is the print image normal?
Go to suspect
component. Problem
solved.