43
Connecting and Routing the Cables
Follow the instructions in this section to install the wire management tracks on your wall and ceiling, place the
cables in the tracks, and connect the cables to your equipment.
Note
If you want, you can route the video cable, speaker cable, and control cable through your wall and ceiling instead of
using the wire management tracks. These cables are plenum-rated (fire retardant), so they can be routed through a wall,
an attic, or the space above your ceiling. If you choose this option, plug the AC power cables for the screen and
projector into nearby electrical outlets. If no outlets are available, contact a licensed electrician to have them installed.
Warning
Do not route the included power cables through the wall or ceiling. They are not rated for this purpose. Deliberate mis-
installation could result in fire or other safety hazards.
Unpack the Wire Management Tracks
Locate the wire management tracks, connector pieces, seam covers, and drywall screws that were packed with
the screen in box # 4.
Wall-to-ceiling
transition (2 sets)
Corner connector
(3 sets)
Seam cover
(20 pieces)
8-foot-long tracks
(6 pieces)
Drywall screws
(100 pieces)
Summary of Contents for Ensemble HD
Page 1: ...Installation Guide ...
