manualshive.com logo in svg

Epson EMP-S4, User Manual

Share
Download
Epson EMP-S4 User Manual Download Page 55

Appendices

This chapter provides information on maintenance procedures to ensure the best level of performance from the projector.

Installation ........................................................... 55

• Setting Up the Projector .....................................................55

Maintenance ........................................................ 56

• Cleaning ...............................................................................56

• Cleaning the Projector's Surface................................................ 56
• Cleaning the Lens ...................................................................... 56
• Cleaning the Air Filter and Air Intake Vents ............................. 56

• Replacing Consumables......................................................57

• Replacing the batteries............................................................... 57
• Lamp Replacement Period......................................................... 58
• Replacing the Lamp................................................................... 59
• Resetting the Lamp Operating Time.......................................... 61
• Replacing the Air Filter ............................................................. 62

Checking Projected Images on an External 
Monitor (Monitor Output) ................................... 63

Optional Accessories and Consumables ......... 64

• Optional Accessories ................................................................. 64
• Consumables.............................................................................. 64

Screen Size and Projection Distance ................ 65

Glossary............................................................... 66

List of ESC/VP21 Commands............................. 68

• Command List .................................................................... 68
• Cable Layouts ..................................................................... 68

•USB connection..........................................................................68

• USB Connection Setup ....................................................... 69

List of Supported Monitor Displays .................. 70

•Computer/RGB Video ................................................................70
•Component Video/RGB Video ...................................................70
•Composite Video/S-Video..........................................................70

Specifications...................................................... 71

•Angle of tilt ................................................................................71

Appearance.......................................................... 72

Index ..................................................................... 73

Summary of Contents for EMP-S4














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands