48
EMP-S1 User’s Guide
Troubleshooting > When You Suspect a Problem
f
Vertical stripes appear in the image
f
Image is distorted / Image contains interference
• Has the "
Tracking
g
" setting been adjusted?
Set the tracking value until the vertical stripes disappear. ([Menu] button
"Image"
→
"Picture Quality"
→
"Tracking")
s
"Image menu" P.35
• Have the "
Sync.
g
", "
Tracking
g
" and
"Position" settings been adjusted correctly?
If the configuration menu "Image"
→
"Auto Setup" setting has been set to
"OFF", press the [Auto] button on the remote control to adjust these
settings. If the images have not been correctly adjusted after pressing the
[Auto] button and using the automatic setup function, adjust the settings
manually in their respective menus. ([Menu] button
→
"Image"
→
"Picture Quality"
→
"Sync.")
s
"Image menu" P.35
• Are the image signal format settings
correct?
• When a computer or
Component Video
g
equipment is connected, select
the appropriate setting for the input source you are using, in the "Image"
→
"Input Signal" configuration menu.
• When
Composite Video
g
or
S-Video
g
equipment is connected, select
the appropriate setting for the video system you are using in the
"Setting"
→
"Video Signal." configuration menu.
• Has the correct resolution been selected?
Set the computer so that the signals that are output are compatible with
this projector. Refer to your computer's documentation for further details.
s
"Supported Display Resolutions" P.66
• Is an extension cable being used?
If using an extension cable, electrical interference may affect the signals.
Confirm that you are using a shielded cable.
• Are the cables connected correctly?
s
"Connecting to a Computer" P.12, "Connecting to Video Equipment"
P.18
