Epson EMP-8200 - XGA LCD Projector, User Manual

Page: 49 / 122

Using the Projector
43
3. To display the entire desktop on both your projector screen and
LCD screen, click the
Arrange
tab. (If you don’t see this tab,
make sure it is not hidden by another window on your screen.)
4. Click
Mirror Displays
in the lower corner of the screen. One of
the monitor icons automatically moves on top of the other.
If you’re using a PC laptop:
■
Press the function key that lets you display on an external
monitor. It’s often identified with an icon such as
or
labelled
CRT/LCD
. You may have to hold down the
Fn
key while
pressing it. Check your laptop’s manual or online help for details.
On most systems, the or
CRT/LCD
key lets you toggle
between the LCD screen and the projector, or display on both at
the same time. Allow a few seconds for the projector to sync up
after pressing it.
■
Depending on your computer’s video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer’s documentation or online help for details.
Click here