manualshive.com logo in svg

Epson EMP-74, User Manual

Share
Download
Epson EMP-74 User Manual Download Page 64

63

Using the Configuration Menu Functions

Using the Configuration Menu Functions

COM Port

This can be set to either "RS-232C" or "USB", depending on 
the port that is being used for communication with a 
computer.
When this setting is changed, turn off the power 
momentarily, and when the 

cool-down

 period has finished, 

turn the power back on again. The new setting will be 
applied after the power turns back on.

RS-232C

Language

Sets the language for message displays.

•Press the [Enter] button on the remote control and select the 

language.

English
(Varies 
depending on 
country of 
purchase)

Reset

Resets all adjustment values for the "Advanced" menu 
functions except for the "Language" setting to their default 
settings.

•Press the [Enter] button on the remote control to reset the 

settings.

•Select "Reset All" to return all settings for menus such as 

"Image" and "Audio" to their default settings. 

 

p.65

-

Sub-menu

Function

Default

Summary of Contents for EMP-74












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands