Menu Operations - 69
Effect
Bar
Sets the color, direction and width of the bar allocated to the
[4] button on the remote control unit.
Press the [Enter] button and select the required item from the
bar setup menu. The color, direction and width can be
selected independently for each of the settings between 1
and 3.
· The [4] button executes the bar function. The bar types will
be switched between 1 and 3 sequentially for each time the
[4] button is pressed. (see page 60)
Individual
settings
between types 1
to 3
Cursor Speed
Selects the speed of Cursor.
L: Slow M:Medium H:Fast
M
Reset
Returns all effect menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to
the default settings. (see page 71)
-
Set-
ting
Keystone
Adjusts images which appear trapezoidal.
· The screen will be reduced in size when keystone correction
has been performed.
· The status of the keystone correction will be recorded.
Perform readjustments that match the installation position
when the projector position or angle have been changed.
· Reduce the sharpness if blurring occurs after keystone
correction. (see page 67)
Center value (0)
P in P
Sets the input source for the P in P function’s sub-screen.
· The P in P function is executed by pressing the [PinP]
button on the remote control unit. (see page 61)
Composite
No Signal Msg
The status for [No Image Signal Input] and other message
display.
· The user logo must be registered and set up before it can be
amended.
Blue
Prompt
Sets whether to display the input source on the screen or not.
ON
A/V Mute
Sets up the screen status for when the [A/V Mute] button is
pressed.
· User logos must be registered and set up before they can be
amended.
Black
Computer2
Sets the mode for the input image signals connected to the
Computer2/Component Video port.
RGB
: Set when the input is a RGB signal.
YCbCr : Set when the input is a component video signal
(YCbCr).
YPbCr : Set when the input is a component video signal
(YPbCr).
RGB
Top
Menu
Sub Menu
Function
Default Value