66
ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates due to a problem, an error
message is output and a ":" is returned.
* Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Communications protocol
Item
Command
Power ON/OFF
ON
PWR ON
OFF
PWR OFF
Signal selection
Video
SOURCE 41
S-Video
SOURCE 42
A/V Mute ON/OFF
ON
MUTE ON
OFF
MUTE OFF
A/V Mute selection
Black
MSEL 00
Blue
MSEL 01
Logo
MSEL 02
Item
Command
Computer1
Port
Computer2
Port
Signal selection
Computer (Auto)
SOURCE 1F
SOURCE 2F
Computer
SOURCE 11
SOURCE 21
Component Video
SOURCE 14
SOURCE 24
• Default baud rate setting:
9600 bps
• Data length:
8 bits
• Parity:
None
• Stop-bit:
1 bit
• Flow control:
None
• Connector shape:
D-Sub 9-pin (male)
• Projector input connector:
RS-232C
Summary of Contents for EMP 400W
Page 1: ...1 User s Guide ...
