Hitachi CP-A52 Series User Manual – Operating Manual Download

Page: 1 / 71

Projector

CP-A52

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “Safety Guide” first. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

• Mac

is registered trademarks of Apple Inc.

• VESA and DDC are trademarks of Video Electronics Standard Association.

• Windows

is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

All other trademarks are the properties of their respective owners.

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.
Please refer to the pages written following this symbol.



Summary of Contents for CP-A52 Series








































































Search results

Summary of Contents for CP-A52 Series

Reviews:

Related manuals for CP-A52 Series

Brands by name

Popular brands

Hitachi CP-A52 Series, User Manual – Operating Manual

Search results

Summary of Contents for CP-A52 Series

Reviews:

Related manuals for CP-A52 Series

Brands by name

Popular brands