8
Mounting the Ceiling Plate
on the Ceiling Plate
A
Engage the screw holes onto the screws on the rear side of
the ceiling plate
.
Set the ceiling plate
with the adjustment dials to the screen.
B
Insert the M8x10 screws into the screw holes on the ceiling
plate
and tighten them with the ball point hex wrench.
Necessary items for the following procedure
Y
Ceiling plate
Y
M8x10 screws (mm)
Y
M4x10 screws
(mm; w/ washer)
Y
Ball point hex wrench
Procedure
Be sure to tighten the screws securely.
After tightening the screws, try re-tightening them once again and make sure that all of them are securely tightened.
Warning
Adjustment dials
To the screen
Route the cables through the
center hole of the plates.
Do the same
for the other side.
To the screen
Summary of Contents for ELPMB30
Page 1: ...ELPMB25 User s Guide ...