13
H
Replace the interface cover.
v
Because the wide lens for rear projection (ELPLR04) has a fixed focus, there is no zoom
adjustment function. The [Lens] button on the control panel and [Zoom] button on the
remote control do not adjust the zoom.
v
The wide lens for rear projection (ELPLR04) is not compatible with lens shift. Use it when
the vertical and horizontal lens shift is set to the center.
Removing
v
Do not remove the lens unit after installing it unless necessary. If dust or dirt enter the
projector, projection quality deteriorates and it could cause a malfunction.
v
If the lens shift has been done, set the lens shift to the center before replacing the lens
unit.
Caution
Caution
Tighten the fixing screw.
Install the cover along the guide.
