Epson ELPHC100, User Manual

Page: 29 / 132

29
Listening to a Tape Deck
Make sure your tape deck (or other audio source) is connected to the
AUDIO 1
port on the back of the
AV controller, as described in “Connecting Audio Equipment” on page 36.
1 Select the
AUDIO
option on the remote control, then select
AUD1
. This switches the audio input to your
tape deck.
2 Use the controls on your tape deck to begin playing music.
Listening to AM/FM Radio
You can use the AV controller to receive AM or FM radio broadcasts. First make sure an antenna is connected,
as described in the
Installation Guide .
Tuning to the Desired Station
1 Select the
RADIO
option on the remote control to activate the radio:
Note
To use the radio, it is not necessary to lower the screen or turn on the projector.
2 Select the
BAND
option on the remote control to switch between AM and FM. The display on the
AV controller shows the current station:
3
Select
TUNE+
or
TUNE–
to change the frequency:
• Press the button momentarily and then release it to change the frequency manually.
• Or press and hold the button to find the next available station automatically. The tuner searches until
a station of sufficient strength has been found, and the word “TUNED” appears on the display. Weak
stations are skipped during the auto-tuning process.
MAIN
DVD
CABLE
SAT
HD
RADIO
1 OF 2
Select
RADIO
Frequency Band