manualshive.com logo in svg

Epson ELPAP07, User Manual

The Epson ELPAP07 is a wireless LAN module designed specifically for Epson projectors. With easy installation, this device allows seamless connectivity between your projector and various devices. To guide you through the setup and configuration, a detailed user manual is available for free download from our website, ensuring a hassle-free installation process.

Share
Download
background image

• Never try to remove the lamp immediately after use because it will be extremely hot. Before removing

the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely.

• Do not disassemble the lamp or subject it to impacts.

• Do not place the source of an open flame, such as a lit candle, on or near the projector.

• Do not block the lens during projection using a book or any object other than the lens cover. This could

damage the projector or cause a fire.

• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or

pull it excessively. Keep the power cord away from hot electrical appliances.

• If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or

coming in contact with your eyes or mouth. If you do inhale gases or gases come in contact with your
eyes or mouth, seek medical advice immediately.

• If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from

falling into your eyes or mouth when you open the lamp cover. If pieces of glass do get into your eyes
or mouth, seek medical advice immediately.

• Always lower the volume before turning off the projector. Turning on the projector with the volume too

high can damage your ears.

Note:

The lamp(s) in this product contain mercury. Please consult your state and local regulations

regarding disposal or recycling. Do not put in the trash.

WARNING

: The cords included with this product contain chemicals, including lead, known to the State of

California to cause birth defects or other reproductive harm.

Wash hands after handling.

(This notice is

provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)

Wireless LAN Module Safety Instructions
Restriction of Use

Parent topic:

Notices

Wireless LAN Module Safety Instructions

Follow these safety instructions when setting up and using the wireless LAN module:

• Do not use the device near any medical equipment or cardiac pacemakers. Electromagnetic

interference from the device may cause such equipment to malfunction and cause an accident.

• Use the device only with an Epson projector. If it is installed in another device, such as a computer, it

may cause damage or malfunctions in the other device.

• Do not disassemble or remodel the device; internal components may cause burns.

176

Summary of Contents for ELPAP07








































































































































































































































Reviews:

No comments

Related manuals for ELPAP07

TB Wood's Dura-Flex Coupling Installation Instructions preview
Dura-Flex Coupling
Brand: TB Wood's Pages: 4
Goobay 53782 User Manual preview
53782
Brand: Goobay Pages: 4
Linksys WRT54GP2 - Wireless-G Broadband Router Setup Manual preview
WRT54GP2 - Wireless-G Broadband Router
Brand: Linksys Pages: 5
National Instruments SC-205X Series User Manual preview
SC-205X Series
Brand: National Instruments Pages: 119
Mustang MPCA-8HD Instruction Manual preview
MPCA-8HD
Brand: Mustang Pages: 5
ZyXEL Communications ZyAIR G-405 User Manual preview
ZyAIR G-405
Brand: ZyXEL Communications Pages: 99
3idee smsng-sa350 Assembly Instructions Manual preview
smsng-sa350
Brand: 3idee Pages: 7
AEG SNMP Ext Quick Start Manual preview
SNMP Ext
Brand: AEG Pages: 32
Epson Stylus COLOR 3000 Specifications preview
Stylus COLOR 3000
Brand: Epson Pages: 1
D-Link DWM-152 Quick Installation Manual preview
DWM-152
Brand: D-Link Pages: 40
Pasport PS-2158 Instruction Sheet preview
PS-2158
Brand: Pasport Pages: 2
CNET CWC-854 Product Specifications preview
CWC-854
Brand: CNET Pages: 1
Encore N300 Series ENLWI-NX2 Quick Installation Manual preview
N300 Series ENLWI-NX2
Brand: Encore Pages: 9
OPTOGAMA MRO Manual preview
MRO
Brand: OPTOGAMA Pages: 25
JINOU BLE5.0 Series User Manual preview
BLE5.0 Series
Brand: JINOU Pages: 26
Sapho ER100 Manual preview
ER100
Brand: Sapho Pages: 3
Q-Waves Quicklink HD Getting Started preview
Quicklink HD
Brand: Q-Waves Pages: 12
Promate iView.HDM User Manual preview
iView.HDM
Brand: Promate Pages: 4

Brands by name

Popular brands

Load more brands