12
Setting
You can make settings from the MOVERIO BT-200 web browser or on your
computer.
1. Hold down the Wireless/Pass-Thru button and the Wireless Connect
button at the same time for at least five seconds.
The unit enters setup mode and the IP address for the unit is displayed on the
device connected to the HDMI Output.
The Wireless Ready and Link indicators flash at the same time.
2. Enter the displayed IP address in the URL bar on your browser.
The setup screen is displayed.
3. Make the necessary settings.
Item
Function
Setting
Select on or off as the power saving setting.
Firmware Update
Update the firmware for the unit. Check the lat-
est firmware at http://www.epson.com
